background image

COPYRIGHT

Fujitsu PC Corporation has made every e

ff

ort to 

ensure the accuracy and completeness of this document.
However, as ongoing development e

ff

orts are contin-

ually improving the capabilities of our products, we 
cannot guarantee the accuracy of the contents of this
document. We disclaim liability for errors, omissions,
or future changes.

Fujitsu and the Fujitsu logo are registered trademarks
and LifeBook is a trademark of Fujitsu Limited.

Built for Humans and ErgoTrac are trademarks of
Fujitsu PC Corporation.

The following are registered trademarks of
IBM Corporation: IBM, IBM PC AT, IBM PS/2.

The following are registered trademarks of
Microsoft Corporation: MS, MS-DOS, Windows 95,
Windows 98, Windows NT.

PCMCIA is a trademark of the Personal Computer
Memory Card International Association.

Phoenix, Phoenix logo, Power Panel, Card Executive
and NoteDock are registered trademarks of
Phoenix Technologies, Ltd.

Intel and Pentium are registered trademarks and
MMX technolory is a trademark of Intel Corporation.
PC-Doctor is a trademark of Watergate Software, Inc.

SoftPEG is a registered trademark of
CompuCore Multimedia Inc.

LapLink is a registered trademark of
Traveling Software Inc.

AudioRack is a registered trademark of
ESS Technology, Inc.

All other trademarks mentioned herein are the 
property of their respective owners.

We cannot guarantee the accuracy of the contents of
this document. We disclaim liability for errors,
omissions, or future changes.

© Copyright 1998 Fujitsu PC Corporation. All rights
reserved. No part of this publication may be copied,
reproduced, or translated, without prior written 
consent of Fujitsu PC Corporation. No part of this
publication may be stored or transmitted in any 
electronic form without the written consent of
Fujitsu PC Corporation.

DECLARATION OF CONFORMITY

according to FCC Part 15

Responsible Party Name: Fujitsu PC Corporation

Address: 598 Gibraltar Drive

Milpitas, CA 95035

Telephone: (408) 935-8800

Declares that product: Model: LifeBook E330.

LifeBook E335.
LifeBook E340.
LifeBook E350.

Complies with Part 15 
of the FCC Rules.

This device complies with Part 15 of the FCC rules.
Operations is subject to the following two conditions:
(1) This device must not be allowed to cause harmful
interference, (2) This device must accept any interfer-
ence received, including interference that may cause
undesired operation.

David Woo

Fujitsu

9/4/98

 





A Copyright.qxd  10/28/98  9:50 AM  Page 1

Содержание Lifebook E330



























































































































































































































Отзывы: