Fujitsu LifeBook C6530, Инструкция по эксплуатации

Страница: 28 / 111

20
Using the Closed Cover switch
1 Close the LCD display panel.
This unit goes into suspend mode using the Closed
Cover switch.
Critical Point
When the BIOS setup “Lid Closure Suspend” setting
is “Disabled”, this unit does not go into suspend mode
even if you close the LCD display panel.
Using the [Exit Windows] dialog box.
1 Click on the [START] button, then on [Exit
Windows].
The [Exit Windows] dialog box will appear on the
screen.
2 Choose [Standby] and click on [OK].
This computer is suspended.
Critical Points
If the BIOS setup Suspend Mode setting is “Suspend”, suspend mode is ended in the following
cases. Save important data to a floppy disk or the hard disk.
• The main switch is switched off.
• In battery operation, the battery runs out.
(The battery is still used in suspend mode.)
If you start with the internal battery fully charged, suspend mode lasts about one day maximum
with the AC adaptor not connected.