manualshive.com logo in svg

Fujitsu Lifebook C352, Руководство пользователя, Страница: 75 / 165

Поделиться
Скачать
Fujitsu Lifebook C352 Скачать руководство пользователя страница 75

C o n f i g u r i n g   Y o u r   L i f e B o o k   C   S e r i e s

L i f e B o o k   C   S e r i e s   f r o m   F u j i t s u

67

Four

Table 4-6 Fields, Options and Defaults for the I/O Device Configuration Submenu of the Advanced Menu

Menu Field

Options

Default

Description

Parallel port:

Disabled; Enabled; Auto.

[Enabled]

Configures the parallel port using either no configuration 
(Disabled), a user defined configuration (Enabled), or by 
allowing the BIOS or OS to choose the configuration (Auto).

Mode:

Output Only;

[Bi-directiona1]

When the parallel port is enabled this option is available allowing 

Bi-directional; ECP.

the user to set the mode for the parallel port. Bi-directional 
allows two-way transfer of information between your notebook 
and a connected parallel device. Output Only (Half Duplex) 
allows information to be transferred in only one direction, from 
your notebook to the printer or similar device. ECP Mode allows
communication with the ECP class of parallel I/O devices.

Base I/O address:

378; 278; 3BC.

[378]

Allows user to set the parallel port base I/O address when the 
parallel port is Enabled.

Interrupt:

IRQ 5; IRQ 7.

[IRQ 7]

Allows user to set the parallel port interrupt when the parallel
port is Enabled.

Floppy disk controller:

Disabled; Enabled.

[Enabled]

Enables and disables the floppy disk drive controller for fixed
floppy disk drive port.

Local BusIDE adapter:

Both; Disabled;

[Both]

Enables and disables the integrated IDE controller.

Primary; Secondary.

Содержание Lifebook C352






































































































































































Отзывы:

Нет отзывов