manualshive.com logo in svg

Fujitsu Lifebook C352, Руководство пользователя, Страница: 74 / 165

Поделиться
Скачать
Fujitsu Lifebook C352 Скачать руководство пользователя страница 74

S e c t i o n   F o u r

66

Table 4-6 Fields, Options and Defaults for the I/O Device Configuration Submenu of the Advanced Menu

Menu Field

Options

Default

Description

Serial Port A:

Disabled; Enabled; Auto.

[Enabled]

Configures the serial port A using either no configuration 
(Disabled), a user defined configuration (Enabled), or by 
allowing the BIOS or OS to choose the configuration (Auto).

Base I/O address:

3F8, 2F8, 3E8, 2E8.

[3F8]

Allows user to set the serial port base I/O address when port A 
is Enabled.

Interrupt:

IRQ3, IRQ 4, IRQ 10, IRQ 11

[IRQ 4]

Set the interrupt for serial port A.

Serial Port B:

Disabled; Enabled; Auto.

[Enabled]

Configures the serial port B using either no configuration 
(Disabled), a user defined configuration (Enabled), or by 
allowing the BIOS or OS to choose the configuration (Auto).

Mode:

IrDA, FIR.

[FIR]

Set the mode for serial port B.

Base I/O address:

3F8, 2F8, 3E8, 2E8.

[2E8]

Allows user to set the serial port base I/O address when port B 
is Enabled.

Interrupt:

IRQ3, IRQ 4, IRQ 10, IRQ 11.

[IRQ 3]

Set the interrupt for serial port B.

Base I/O address:

100, 108, 110, 118.

[118]

DMA Channel:

DMA 1, DMA 3.

[DMA 3 ]

When Sound is Enabled, this option is available allowing the user
to set the DMA channel for the sound device.

Содержание Lifebook C352






































































































































































Отзывы:

Нет отзывов