manualshive.com logo in svg

Fujitsu Lifebook C352, Руководство пользователя, Страница: 36 / 165

Поделиться
Скачать
Fujitsu Lifebook C352 Скачать руководство пользователя страница 36

Thr

ee

U s i n g   Y o u r   L i f e B o o k   C   S e r i e s

L i f e B o o k   C   S e r i e s   f r o m   F u j i t s u

27

Shorted Batteries

If your Status Indicator panel shows a shorted
battery, check the installation for that battery by
removing and re-installing it. If it still shows
that it is shorted, replace it with a new battery.

C A U T I O N

A shorted battery is damaged and must
be replaced so that it does not damage
anything else.

The Lithium ion battery is recharged internally
using the AC adapter or auto/airline adapter.
To recharge a battery:

■

Make sure the battery to be charged is
installed in the battery bay of your notebook
and the notebook is connected to a
power source.

■

Make sure that the Battery Charging indica-
tor to the left of the Battery Level indicator
is visible on the Status Indicator panel.

■

Make sure the percentage charge is shown
inside the Battery Level icon.

(Figure 3-4 on page 23

.

)

Recharging the Battery

If you want to check the condition of the
Lithium ion battery check the Battery Level
indicator located on the Status Indicator 
panel. This indicator changes as the battery 
level changes.

There is no memory effect on the Lithium ion
batteries, which means that you do not need to
discharge them completely before recharging. A
single fully discharged Lithium ion battery will
charge in approximately three (3) hours when
your notebook is Off or in Suspend mode. The
charging time will be significantly longer if your
notebook is in use when the battery is charging,
(approximately nine (9) hours.)

C A U T I O N

Using heavy current devices such as LAN
cards or frequent CD-ROM accesses may
prevent charging completely.

Содержание Lifebook C352






































































































































































Отзывы:

Нет отзывов