manualshive.com logo in svg

Fujitsu Lifebook C352, Руководство пользователя, Страница: 46 / 165

Поделиться
Скачать
Fujitsu Lifebook C352 Скачать руководство пользователя страница 46

Thr

ee

U s i n g   Y o u r   L i f e B o o k   C   S e r i e s

L i f e B o o k   C   S e r i e s   f r o m   F u j i t s u

37

C A U T I O N

The internal modems on all Fujitsu
notebooks from Fujitsu PC Corporation
are not qualified for use with telephone 
systems outside the United States and
Canada and may not operate in
other countries.

C A U T I O N

If you reformat the internal hard drive
ALL data including the operating system,
applications software and data will be
erased. Unless data is copied to floppy
disks or other data storage media it will
be permanently lost. All software will be
need to be re-installed and data files
restored from your back-up disks. See the
operating system manual for more infor-
mation on backing-up your data files. The
factory installed software, including the
operating system, can be restored from
the Recovery CD-ROM which came in
the accessories box when you purchased
your notebook. 

(See Recovery CD-ROM

on page 142 for more information.)

Any

application software which you have pur-
chased and installed will have to be re-
installed from the original source. When
doing a recovery remember that you must
allocate space for the Save-to-Disk func-
tion if you have it enabled. 

(See Setting

Up Your Save-to-Disk File Allocation on
pages 102-103 for more information.)

C A U T I O N

The internal modem is designed to
the ITU-T V.90 standard. Its maximum
speed of 53000bps is the highest allowed
by FCC, and its actual connection rate
depends on the line conditions. The
maximum speed is 33600bps at upload.

C A U T I O N

The internal modem is not intended for
use with Digital PBX systems. Do not
connect the internal modem to a digital
PBX as it may cause serious damage to
the internal modem or your entire note-
book. Consult your PBX manufacturer’s
documentation for details. Some hotels
have digital PBX systems. Be sure to find
out BEFORE you connect your modem.

INTERNAL MODEM

Your internal modem is a 56K fax/data/voice
modem with v.90 support that is controlled by
Windows 98, LapLink, or other software.

Содержание Lifebook C352






































































































































































Отзывы:

Нет отзывов