manualshive.com logo in svg

Fujitsu Lifebook C352, Руководство пользователя, Страница: 67 / 165

Поделиться
Скачать
Fujitsu Lifebook C352 Скачать руководство пользователя страница 67

C o n f i g u r i n g   Y o u r   L i f e B o o k   C   S e r i e s

L i f e B o o k   C   S e r i e s   f r o m   F u j i t s u

59

Menu Field

Options

Default

Description

Type:

Auto; None;

[Auto]

Selects the ATA/ATAPI device type. Set to Auto to have the type 

CD-ROM; User.

automatically identified by the BIOS at POST. If None is selected,
all of the following Set-up items do not appear. Select CD-ROM
if a CD-ROM drive is installed at this connection. If User is 
selected, you must specify the number of Cylinders, Heads,
and Sectors for the drive.

Multi-Sector Transfers:

Disabled; 2; 4; 8; 16.

Disable

Specify the number of sectors per block for multiple sector 

MAX 32; MAX 64; MAX 128.

transfer. MAX refers to the size the disk returns when required.
This option cannot be changed when Auto is selected.

LBA Mode Control:

Enabled; Disabled.

Disabled

Enables or disables logical Block Addressing in place of Cylinder,
Head, Sector addressing. This option cannot be changed when 
Auto is selected.

Transfer Mode:

Standard, Fast PIO 1; Fast PIO 2;

Standard

Selects the method for moving data to/from the drive. Autotype 

Fast PIO 3; Fast PIO 4;

the drive to select the optimum transfer mode. This option 

Fast PIO 3 / DMA;

cannot be changed when Auto is selected.

Fast PIO 4 / DMA.

Ultra DMA Mode:

Disabled; Mode 0;

Disabled

Selects the method for moving data to/from the drive. Autotype 

Mode 1; Mode 2.

the drive to select the optimum transfer mode. This option 
cannot be changed when Auto is selected.

Four

Table 4-3 Fields, Options and Defaults for the Secondary Master Submenu

Содержание Lifebook C352






































































































































































Отзывы:

Нет отзывов