manualshive.com logo in svg

Fujitsu Lifebook C352, Руководство пользователя, Страница: 157 / 165

Поделиться
Скачать
Fujitsu Lifebook C352 Скачать руководство пользователя страница 157

A p p e n d i c e s

152

External Keyboard Support

PS/2 compatible.

External Numeric Keypad Support

PS/2 compatible.

External Mouse Support

PS/2 compatible.

Power

Batteries

One Lithium ion battery, Fujitsu Model
FPCBP19. Rechargeable, 10.8V, 2800mAh.
Operating time of up to 2.5 hours(C352) or 2
hours(C360). Rapid charge (notebook off or in
suspend mode) in about three (3) hours.
Standard charge (normal use with limited CD
and hard drive access) in about nine (9) hours.

Bridge Battery

Your C Series notebook comes equipped with
a bridge battery. A bridge battery allows a
charged Lithium ion battery to be replaced 

C A U T I O N

Actual battery life will vary based on
screen brightness, applications, features,
power management settings, battery
conditioning, and other customer 
preferences. CD-ROM or hard drive
usage may also have a significant impact
on battery life.

AC Adapter

Autosensing 100-240V AC, 44.8W, supplying 
16V DC to the Notebook,

Power Management

Save-to-Disk, Suspend, Idle and Standby power
savings modes. When the battery is fully
charged the computer can remain in Suspend
mode for approximately 24 hours or more.

Dimensions and Weight

Overall Dimensions

Approximately 12.3" x 10.2" x 1.95".
(313.5 mm x 258 mm x 49.5 mm.)

Weight

C360/C352 = 7.9 lbs (3.6kg)

without shutting down the system. The bridge
battery capacity is not large, and can vary with
the condition of your notebook, so you will have
3 minutes at the most to make the change.

Содержание Lifebook C352






































































































































































Отзывы:

Нет отзывов