manualshive.com logo in svg

Fujitsu Lifebook C352, Руководство пользователя, Страница: 100 / 165

Поделиться
Скачать
Fujitsu Lifebook C352 Скачать руководство пользователя страница 100

S e c t i o n   F o u r

92

S e c t i o n   F o u r

Menu Field

Options

Default

Description

SUS/RES Switch:

Enabled; Disabled.

[Enabled]

Sets the function of the Power button when your notebook
is in an active state. The resume function can not be
disabled as it works regardless of any other settings.

Lid Closure Suspend:

On; Off.

[On]

Enables and disables having closure of the Display panel put your
notebook in Suspend mode.

Lid Open Resume:

On; Off.

[On]

Enables and disables having opening the Display panel acting as
an automatic resume.

APM CPU Idle Mode:

Low Power; Standard.

[Low Power]

Sets the CPU speed during Idle mode.

Serial Mouse Activity:

Enabled; Disabled.

[Disabled]

Enables and disables having activity on the serial port cause the
system to reactivate from inactivity timeouts.

Table 4-15 Fields, Options and Defaults for the Advanced Features Submenu of the Power Menu

Exiting from the Power Menu

When you have finished setting the parameters
on the Power menu, you can either exit from the
Setup utility or move to another menu. If you
wish to exit from Setup Utility press the 

Esc

key

to go to the Exit menu. If you wish to move to
another menu, use the cursor keys.

Содержание Lifebook C352






































































































































































Отзывы:

Нет отзывов