Fujitsu Lifebook B112, Руководство пользователя

Страница: 139 / 174

T r o u b l e s h o o t i n g
L i f e B o o k B 1 1 2 f r o m F u j i t s u
125
2. You did not hold the button in long enough. 2. Hold the button longer. This may need to be
a very long time if your application is preven-
ting the CPU from checking for button pushes.
3. There may be a conflict with the 3. Close all applications, and try the
application software. button again.
The system powers up, and displays the power on 1. The boot sequence settings of the setup utility 1. Set the operating source by pressing the Esc
information, but fails to load operating system. are not compatible with your configuration. key while the Fujitsu logo is on screen or use
the
F2 key and enter the setup utility and
adjust the source settings from the Boot
menu. (See Boot Menu on page 91.)
2. You have a secured system requiring a 2. Make sure you have the right password. Enter
password to load your operating system. the setup utility and verify the Security
settings and modify them as appropriate.
(See Security Menu on pages 79-82.)
3. Internal hard drive was not detected. 3. Use the BIOS setup utility Main menu,
Primary Adapter submenu to try to auto
detect the internal hard drive.
Six
Symptom Possible Cause Possible Solution