Fujitsu Lifebook B112, Руководство пользователя

Страница: 126 / 174

S e c t i o n F i v e
112
5. Replace the cover by following the
instructions in steps 10 through 11 of the
instructions of To Install a Memory Upgrade
Module, or install new memory upgrade
modules and then replace the cover by
following the instructions in steps 6 through
11 of the instructions of To Install a Memory
Upgrade Module.
Checking the Computer
Recognition of New Memory Capacity
When you have changed system memory capac-
ity by adding or removing memory upgrade
modules, be sure to check that your notebook
has recognized all of the active memory. You
can check memory capacity by looking at the
Main Menu of the setup utility:
1. Turn on power using the power switch.
2. Enter the setup utility by pressing the F2 key
as soon as the Fujitsu logo appears on the
screen. (See page 45.)
3. The System Memory and the Extended
Memory capacity, as detected by your note-
book during the Power On Self Test (POST),
are displayed at the bottom of the Main
Menu screen.
Example: A system with 32MB of memory
will display 640K System Memory, 31M
Extended Memory.
When you have installed additional memory,
the display should change. For example for:
Total RAM System Extended
Installed Memory Memory
32MB 640 K 31M
48 MB 640 K 47M
64 MB 640 K 63M
96 MB 640 K 95M
If the total memory displayed is not what you
believe it should be, check that your memory
upgrade module is properly installed. If
properly installed and the capacity is not
correctly recognized, see the Troubleshooting
Section starting on page 118.