manualshive.com logo in svg

Fujitsu Lifebook B112, Руководство пользователя

Поделиться
Скачать
Fujitsu Lifebook B112 Скачать руководство пользователя страница 131

T r o u b l e s h o o t i n g

L i f e B o o k   B 1 1 2   f r o m   F u j i t s u

117

Keyboard or Mouse Problems

The built-in keyboard does not seem to work.

1. The notebook has gone into Suspend mode.

1. Push the Suspend/Resume button.

2. Your application has locked out 

2. Try to use the touchpad pointing device 

your keyboard.

to access the Start menu and then the 
ShutDown menu and restart the System.
If this fails then turn your notebook off,
wait 10 seconds or more, and then turn it 
on using the power switch.

You have installed an external keyboard or 

1. Your external device is not properly installed.

1. Re-install your device. (See USB Mouse on 

mouse, and it does not seem to work.

page 108 or Keyboard on page 109.)

2. Your operating system software is not 

2. Check your device and operating 

setup with the correct software driver for 

system documentation and activate the 

that device.

proper driver.

You have connected an external keyboard or a 

1. Your operating system software is not setup 

1. Check your device and operating system 

mouse and it seems to be locking up the system.

with the correct software driver for that device.

documentation and activate the proper driver.

2. Your system has crashed.

2. Restart your system by shutting down 

and/or turning off the power, waiting at 
least 10 seconds and then turning the 
power on again.

Six

Symptom

Possible Cause

Possible Solution

Содержание Lifebook B112















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды