Fujitsu Lifebook B112, Руководство пользователя

Страница: 120 / 174

S e c t i o n F i v e
106
To Uninstall the Port Replicator:
1. Shut down any files open on any devices
attached to the Port Replicator and remove
all connected devices.
2. Turn the Port Replicator Attachment Knobs
counter-clockwise until the threads disen-
gage and the knobs spin freely. (Figure 5-5.)
3. Pull the Port Replicator away from the
notebook until the Docking Connectors are
clear. (Figure 5-6.)
EXTERNAL INSTALLATION
OF A FLOPPY DISK DRIVE
To Connect An External Floppy Disk Drive:
1. Align the connector of the external floppy
disk drive with the connector towards the
rear of your Port Replicator with the wide
side of the connector down. (Figure 5-7.)
2. Insert the connector of the modular floppy
disk drive firmly into the port on your Port
Replicator until it clicks.
To Disconnect An External Floppy Disk Drive:
1. Squeeze the releases on the sides of the exter-
nal floppy disk drive connector next to the
Port Replicator together. (Figure 5-7.)
2. Pull the connector free.
PC CARDS
PC Cards perform a wide variety of functions,
and are ideal for mobile computers.
Some examples of PC Cards are:
■
Fax/data modem cards (Type II).
■
Local area network (LAN) cards (Type II).
■
Wireless LAN cards (Type II).
■
1MB/2MB static RAM (SRAM) cards (Type I).
Figure 5-7 Installation of an External Floppy Disk Drive
■
IDE solid-state disk cards (Type II).
■
SCSI card (Type II).
■
Zoomed Video cards (Type II).
■
Other PC cards that conform to PCMCIA 2.1
or PC CardBus standards.
For further information, refer to the instruc-
tions supplied with your PC Card.
Caring for PC Cards
PC Cards are durable; however, you must treat
them with care. The documentation supplied
with your PC Card will provide specific infor-
mation; however, you should pay attention to
the following points:
■
To keep out dust and dirt, store PC Cards in
their protective sleeves when they are not
installed in your notebook.
■
Avoid prolonged exposure to direct sunlight
or excessive heat.
■
Keep the cards dry.
■
Do not flex or bend the cards, and do not
place heavy objects on top of them.