![background image](http://html.mh-extra.com/html/fujitsu/flm-150-adm/flm-150-adm_maintenance-and-trouble-clearing_119988187.webp)
5.7: Placing an SDCC In Service
Issue 9, May 1999
FNC and FNC Customer Use Only
Vol. ll, Page 480.5-25
Maintenance and Trouble Clearing
FJTU-320-515-480
Step 2
Edit the SDCC status.
a. Select In Service.
b. Click OK.
c. Click Initialize.
d. Click Retrieve to verify that the command was successful.
e. Click Cancel to close the dialog box. Is the channel in service?
5.7.3
TL1 Procedure
Note: Verify that you receive a completed (COMPLD) response to each command before
going to the next step.
Step 1
Retrieve the SDCC status by using the following TL1 command.
RTRV-SDCC:TID:AIDs:CTAG;
The possible settings are IS (In Service) and OOS (Out of Service). Is the channel
in service?
Step 2
Edit the SDCC status by using the following TL1 command.
ED-SDCC:TID:AIDs:CTAG::::IS;
If Yes:
If No:
You have completed this
procedure.
Call the Fujitsu Technical Assistance
Center at 1-800-USE-FTAC
(1-800-873-3822) for assistance.
If Yes:
If No:
Call the Fujitsu Technical Assistance Center at 1-800-
USE-FTAC (1-800-873-3822) for assistance.
Содержание FLM 150 ADM
