manualshive.com logo in svg

Fujitsu FLM 150 ADM, Техническое обслуживание и устранение неисправностей

Поделиться
Скачать
Fujitsu FLM 150 ADM Скачать руководство пользователя страница 27

1.6:  Repairing Defective Units

Issue 9, May 1999

FNC  and FNC Customer Use Only

Vol. ll, Page 480.1-17

Maintenance and Trouble Clearing
FJTU-320-515-480

1.6

Repairing Defective Units

Fujitsu does not recommend field repair of defective units. Equipment failures 
should be corrected by replacing the defective unit with a working spare. Return 
defective units to a Fujitsu field service office. 

Units under warranty will be repaired or replaced with new or refurbished units 
and returned. Equipment out of warranty will be evaluated to determine the 
repair cost and date of delivery. The field service office will then notify you 
concerning the cost and delivery date and will request authorization to proceed 
with repairs. Fujitsu also offers a fixed-price repair and exchange service. 
Information about the defective units can be furnished by mail or telephone. In 
any correspondence, include the following information:

•

The unit part number and serial number

•

A brief description of failure symptoms

•

The original purchase order number covering the unit

•

The return shipping address

•

The shipping mode preference

•

The invoice

•

The name and telephone number of the person to contact for further 
information

Ensure that the units you return are properly packaged to prevent damage. 
Fujitsu is not liable for damage incurred during shipment.

Содержание FLM 150 ADM







































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды