manualshive.com logo in svg

Fujitsu FI-5900C, Руководство оператора

Поделиться
Скачать
Fujitsu FI-5900C Скачать руководство пользователя страница 120

100

3.12 Not detecting Multifeed for fixed format

■

Intelligent Multifeed Function

There are three modes; select one according to your needs.
Select a mode by using the Software Operation Panel. For how to select a mode, see section 2.

Item in 

Software 

Operation 

Panel

Method to bypass Multifeed

Applicable case

Comments

Manual mode
(Bypass by front 
panel button)

When a Multifeed error occurs, press [Send to] to 
eject sheet in the scanner's transport path. Examine 
the last sheet scanned.
If no paper is glued on the ejected sheet, return the 
sheet to the Hopper and press the [Scan] button.
If glued paper is present on the ejected sheet, return 
the sheet to the Hopper, press the [Function] button 
once (Slow Blink rate of the function number display 
will change to Fast Blink rate) and press the [Scan] 
button. The scanner will not check for a Multifeed 
error on the first sheet being scanned. 
The following sheets are checked for Multifeed 
errors with the already-existing Multifeed settings in 
the Software Operation Panel or driver. (Default) 

Use this mode when you 
want to continue scan-
ning, while checking for 
glued paper every time a 
multifeed error is 
detected.

Pages scanned before 
errors are sent to memory.
Extraneous images may 
be generated during a 
Multifeed error.

Automode 1
(Bypass by com-
bination of length 
and position)

When a Multifeed error occurs, press [Send to] to 
eject sheet in the scanner's transport path. Examine 
the last sheet scanned.
If no paper is glued on the ejected sheet, return the 
sheet to the Hopper and press the [Scan] button.
If glued paper is present on the ejected sheet, return 
the sheet to the Hopper, press the [Function] button 
once (Slow Blink rate of the function number display 
will change to Fast Blink rate) and press the [Scan] 
button. The scanner will record the length and posi-
tion of the glued paper that caused the error. 
The following sheets are checked for Multifeed 
errors and then the scanner bypasses Multifeed, if 
the scanned overlap pattern is same as already 
recorded pattern(s).

Use this mode when you 
scan many sheets in a 
fixed format; for exam-
ple, when every sheet has 
the same size glued paper 
at the same location. 

Pages scanned before 
errors are sent to memory.
Extraneous images may 
be generated during a 
Multifeed error.

Automode 2
(Bypass by 
length)

When a Multifeed error occurs, press [Send to] to 
eject paper in the scanner's transport path. Examine 
the last sheet scanned.
If no paper is glued on the ejected sheet, return the 
sheet to the Hopper and press the [Scan] button.
If glued paper is present on the ejected sheet, return 
the sheet to the Hopper, press the [Function] button 
once (Slow Blink rate of the function number display 
will change to Fast Blink rate) and press the [Scan] 
button. The scanner will record the length of the 
glued paper that caused the error. 
The following sheets are checked for Multifeed 
errors and then the scanner bypasses Multifeed, if 
the scanned overlap pattern is the same or shorter 
than the already recorded pattern. 

Use this mode when you 
scan multiple sheets, 
each having different-
size glued paper at a dif-
ferent location.

Pages scanned before 
errors are sent to memory.
Extraneous images may 
be generated during a 
Multifeed error.

Содержание FI-5900C


































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды