Fujitsu Fi-5110EOX2 - ScanSnap! - Document Scanner, Руководство оператора

Страница: 49 / 181

3.2 Scanning Different Document Types
ScanSnap fi-5110EOX2 Operator's Guide
31
Basic Scanner Oper
ations
3
HINT
Do not use the following documents:
•
Documents with paper clips or staples (they can be used after the paper clips
or staples are removed)
•
Documents on which the ink is still wet (they can be used after the paper is
thoroughly dried)
•
Documents larger than Legal (width: 8.5 in, length: 14 in)
•
Documents folded in half larger than 216 x 297 mm (W x L) (8.5 x 11.7 in)
•
Materials other than paper such as fabric, metal foil, or transparencies
•
Carbon paper
•
thermal paper
Also, if you load the following documents directly on the scanner, the
documents may be damaged or may not be scanned successfully. It is
recommended to insert and then scan the documents inside the Carrier Sheet:
•
Documents smaller than 2 (width) x 2 (length) inches
•
Documents thinner than 52 g/m
2
(14 lb) and thicker than 127 g/m
2
(34 lb)
•
Documents of non-uniform thickness (e.g. envelopes, paper which has
another paper pasted on, etc.)
•
Wrinkled or curled documents
•
Folded or torn documents
•
Tracing paper
•
Coated paper
•
Photographs (printing paper)
•
Perforated or punched documents
•
Documents that are not square or rectangular
•
Documents of non-uniform width
•
Carbonless paper
ATTENTION
•
To prevent the rollers from getting dirty, avoid scanning documents containing
large areas written or filled with pencil. If the scanning of such documents is
inevitable, clean the rollers more frequently. For details refer to "6.2 Cleaning
the Scanner Exterior" (page 135).
•
Carbonless paper contains chemical substances that may harm the Pad ASSY
or rollers (e.g. Pick roller) when documents are fed. Pay attention to the follow-
ing:
- Clean the Pad ASSY or rollers as frequently as possible.
- The service life of the scanner may be shortened compared with the case of
scanning woodfree paper.