Fujitsu D2912, Руководство по биосу

Страница: 63 / 72

Power Menu – Energy saving functions
Power On Source: Wake Up Timer – Switch
on according to time
Switch onsystem
Speci fi es whether the system can be set to switch on at a particular time or after a
particular period of time. The switch-on date cannot be speci fi ed in
BIOS Setup
. A suitable
application is required in order to set the switch-on date.
Enabled
The system can be switched on using timer control.
Disabled
The system cannot be switched on using timer control.
Rebooting after a critical system error is not affected by this setting.
Power On Source: Wake Up Time – Switch on according to time
Wake UpTime
Speci fi es the exact point in time at which the system is to be switched on.
00:00:00
Power On Source: Wake Up Mode
Wake UpMode
Speci fi es the switch-on period.
Daily
The system is switched on daily.
Monthly
The system is switched on monthly.
Power Failure Recovery – System status
after a power failure
Powerfailure,systemreaction
Speci fi es the system behaviour after a restart caused by a power failure.
Always Off
The system switches on brie fl y, performs a status check (initialisation), and
then switches off.
Always On
The system switches on.
Previous State
The system switches on brie fl y, performs a status check, and then returns the
mode it was in before the power failure occurred (ON or OFF).
Disabled
The system does not switch on.
All wake up sources are recon fi gured during the short initialisation process.
The system can be ’woken up’ via LAN etc. When
Disabled
is set, the system
can only be ’woken up’ using the power-on button.
Fujitsu Technology Solutions 59