Fujitsu D2912, Руководство по биосу, Страница: 51 / 72

Security Menu - Security features
New SmartCards have a preset PUK (see above).
You will need to know the PUK assigned to the SmartCard if you want to
re-initialise a previously initialised SmartCard.
► Enter the PUK.
The following message will be displayed:
•
ACCESS DENIED
= You have entered the wrong PUK. After six failed attempts,
the SmartCard will be blocked and can no longer be used.
► Enter a new PIN at the following prompt:
Enter new PIN:
Confirm new PIN:
For the new PUK, 4 to 8-digit numbers are acceptable. For security
reasons, we recommend that you change the PUK for every SmartCard
and use an 8-digit number each time.
► Re-enter the new PIN to con fi rm.
The following message will be displayed:
•
PIN/PUK do not match
= You have con fi rmed the PIN incorrectly. You will be
requested to re-enter the new PIN and recon fi rm.
Please wait a few seconds after con fi rming the new PIN:
SystemLock
will be installed.
The following message will be displayed if installation is successful:
Setup Notice
Changes have been saved
[Continue]
► Press the Enter key. The SystemLock administration menu will be displayed:
Fujitsu Technology Solutions 47