7.
Proceed to number setting by pressing the FAN button.
To return to the function number selection, press the FAN button again.
8.
Select the setting number by pressing the or the button.
Each time the MODE button is pressed, it switches between the left digit and the right digit.
Change digit
9.
Send the function mode information by pressing the TIMER MODE button once.
2 short beeps
10.
Send the function setting information by pressing the START/STOP button once.
2 short beeps will be emitted from the indoor unit when the signal is received correctly. If wrong
code is set, no beep sound will be emitted.
2 short beeps
NOTE:
Press START/STOP button within 30 seconds after pressing TIMER MODE button.
Function details: Refer to Chapter 8-6.
- 265 -
8-2. Indoor unit (setting by wireless remote controller)
8. Function settings
SYSTEM
DESIGN
SYSTEM
DESIGN
Содержание AUYG18LVLB
Страница 151: ...Part 2 OUTDOOR UNIT SIMULTANEOUS MULTI AOYG72LRLA AOYG90LRLA ...
Страница 181: ...Part 3 SYSTEM DESIGN ...
Страница 333: ...Part 4 OPTIONAL PARTS ...