Fujitsu AOTG18KMTC, Инструкция по эксплуатации

Страница: 70 / 89

Choose from the following modes to connect your Air conditioner to your Wireless LAN router .
Note:

Before starting this setting, wait for 60 seconds or more after the power supply is connected to the air conditioner (via breaker or plug). Confirm that the LED 1 is not flashing.

Check that the smartphone or tablet PC is linked to the wireless router you are connecting the air conditioner.
The setting will not work if it is not connected to the same wireless router.

The display contents are subject to change as a result of updates in the mobile app, and may not match the actual screen.

To control 2 or more air conditioners with the same smartphone or tablet PC, repeat the setup of the chosen mode.
Air conditioner registration
Paring Method
02-4 5
■ Manual mode (For Android OS)
*Lighting pattern:
On Blinking
Any state
NOTES: If you do not press any buttons of the remote controller for 60 seconds, the remote controller display will
return to the original display.
1
Press on the remote controller until only the
clock is displayed on the remote controller display.
2
Launch the mobile app.
3
Sign in with your Email address and password fol-
lowing the screen on the mobile app.
(E mail Address)
(Pass word)
Sign In
4
Press [+] to add a new air conditioner.
+
5
Press down on the remote controller for more
than 5 seconds.
will be displayed on the remote controller dis-
play.
(Remote controller
display)
6
Press .
7
Select using .
(Remote controller
display)
8
Press .
on the indoor unit will blink.
(Continued)