En-32
Setting method
(2)
1: FUNCTION Setting
2: Setting the
fi
rst 2 digits
3: Setting the
last 2 digits
First 2 digits Last 2 digits
(Blinking)
(Blinking)
(Blinking)
(Blinking)
(Blinking)
(Blinking)
(Blinking)
EXIT
(Blinking)
(Blinking)
(Blinking)
(Blinking)
(the display when the main power is turned on)
(When [F3] to [F9] are displayed, continue to press the SELECT button until [F2] is displayed.)
Every press of the SE-
LECT button will change
the setting number for the
fi
rst 2 digits.
Press the SELECT button to change the value for the last 2 digits.
Press the ENTER button to con
fi
rm
the value “02” for the last 2 digits
Press the ENTER button to con
fi
rm
Continue to press the SELECT button until the
desired number appears at the last 2 digits.
Press the MODE/EXIT button to cancel the setting mode.
Press the SELECT
button to select
the next item for
the
fi
rst 2 digits.
(Setting is complete when the lamp lights up)
(Setting is complete when the lamp lights up)
Press the MODE/EXIT button.
Press the SELECT button.
Press the SELECT button
Press the SELECT button
Press the ENTER button.
Press the ENTER button
Press the ENTER button
7 segment LED display
(LED105, LED104)
＆ ＞
＆ ＜
＠ ＠
＠ ＠
＠ ＠
＠ ＠
＠ ＠
＠ ＠
＞ ＠
８ ＜
８ ＜
８ ＜
８ ＜
＠ ＠
＠ ＠
＠ ＞
＠ ＜
＠ ＜
＠ ：
＠ ＠
＠ ＠
＠ ＠
＠ ＞
＠ ＞
Press the SELECT button to change the value for the last 2 digits.
Press the ENTER button to set the next item.
(If there is no operation for 5 seconds after the setting, the
display will return to “2: Setting the
fi
rst 2 digits”.)
Press the ENTER button to set the next item.
(If there is no operation for 5 seconds after the setting, the
display will return to “2: Setting the
fi
rst 2 digits”.)
Use the MODE/EXIT, SELECT, and ENTER buttons
to con
fi
gure settings according to the procedures
below.
[1: FUNCTION Setting]
→
[2: Setting the
fi
rst
2 digits]
→
[3: Setting the last 2 digits]
(If no setting is made, the factory default setting
will be displayed.)
9378945029-03_IM_EN.indb 32
9378945029-03_IM_EN.indb 32
2011-9-20 16:26:01
2011-9-20 16:26:01
