Fujitsu 19R-261A2, Руководство пользователя, Страница: 140 / 188

140
7
Install the handle on the front door.
・ Rotate the handle by 180 degrees to change the orientation, and secure the handle with the
tapping screws that are 13 mm and 25 mm long.

Install the rotation control member with the gear facing up. Be careful not to install
it in the wrong orientation.

For each tapping screw location, use a tapping screw of the same length as that
removed in step 6. Using a tapping screw of a different length may damage the
part.
Note: Use a torque driver to tighten the tapping screws to a tightening torque of 1.0 N•m. If
no torque driver is available, be careful not to overtighten them. Otherwise, you may
damage the handle.
13-mm-long tapping
screws
13-mm-long tapping screws
Decorative
panel
Handle body
25-mm-long tapping screws
Flat washer
Rotation control member