30
4. SETUP AND MAINTENANCE
4
9) Set up the “Gradation Adjustment”, “Bright Mode” and
“Basic Color Mode”.
<Gradation Adjustment>
Gradation Selection: Hard 2
Hard 1
Normal
Soft 1
Soft 2
Soft 3
<Bright Mode>
Color Intensity: 4
3
2
1
0
-1
-2
<Basic Color Mode>
Mode: 0
1(Nature Mode)
●
Input Type: Black & White
• The “1. Corr. Level/Tone/Hypertone” panel appears.
1) Set up the “Correct Level”, “Tone Adjustment” and
“Hypertone”.
<Correct Level>
<Tone Adjustment>
Standard
All Hard
All Soft
Highlight Hard
Highlight Soft
Shadow Hard
Shadow Soft
2) Click the “2. Key Step Width/BL-SL” tab.
• The “2. Key Step Width/BL-SL” panel appears.
3) Set up the key step width and balance/slope.
NOTE: Click the [Default] to return the key step width
setup to the initial value.
<Key Step Width Setup>
Dc, Dm, Dy: Normally enter “15”.
<BL/SL Setup>
Normally enter “0”.
4) Click the “3. Sharpness/Grain Control” tab.
• The “3. Sharpness/Grain Control” panel appears.
5) Select “Hyper-sharpness” for “Sharpness process”. Set up
“Sharpness”, “Grain Control Process”, “Sharpness Large-
size Setup” and “Minimizing Color Spreading”.
<Sharpness>
Sharpness Level: Low 3
Low 2
Low 1
Normal
High 1
High 2
High 3
Under Level:
–2
–1
0
(Sharpness can only be set individually for under level.)
Tone Correction Color/Density Correction
Full Correction:
Yes
Yes
Tone Fixing:
No
Yes
Condition Confirm:
No
No
SP3000_instruct_E.book 30 ページ 2007年12月11日 火曜日 午後1時6分