Introduction
• This Instruction Manual — Condition Setup and Maintenance — explains the procedures for condition
setup and maintaining the scanner SP-3000 as well as precautions for use.
• To ensure proper use and optimum performance of the scanner SP-3000, read this manual thoroughly.
• This manual should be kept in a fixed place near the machine so that it can be referred to whenever a
point needs to be clarified.
• In addition to this instruction manual, the following separate volumes have been prepared:
Operating Instructions:
This volume describes the operating instructions and routine maintenance
procedures, as well as error messages and actions to be taken in operating
the scanner SP-3000.
NOTICE: 1. Electro-optical-mechanical reproduction of this manual is strictly forbidden.
2. Product innovations may result in specification changes without prior notice.
UNITED STATES OF AMERICA (FCC)
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
CANADA (ICES)
This class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la class A respecte toutes les exigences du Réglement sur le matériel brouilleur du Canada.
SP3000_instruct_E.book 2 ページ ２００７年１２月１１日 火曜日 午後１時６分
