FujiFilm FUJINON HA14x4.5 BEZD-T58B, Руководство по эксплуатации

Страница: 48 / 108

(3) QuickZoom Operation
In quickzoom operation, pressing a switch moves the zoom to the tele end quickly.
The operator can use this function in such occasions listed below.
Operation
a. Set the quickframe/manual zoom select knob to “ON.”
b. Keep pressing the quickzoom & auto cruising zoom switch until the zoom reaches the tele end.
c.
d.
(If you press the quickzoom & auto cruising zoom switch again before the zoom returns to its former
position, the quickzoom movement restarts.
After this operation, if the switch is released, the zoom will move to its former position quickly. )
Note 1. By setting an appropriate switch in the area of “Function & Mode Select Switches” (refer to page 1
8 ),
the return switch and the VTR switch can be used also as a quickzoom & auto cruising zoom switch.
Note 2. In quickzoom operation, the zoom moves at the maximum speed irrespective of the setting position of
the zoom maximum speed control knob.
Note 3. If you press the quickzoom & auto cruising zoom switch while pressing the zoom seesaw control lever,
the zoom moves in auto cruising zoom operation, not in quickzoom operation.
Note. If the zoom limit function is used, the zoom will stop at the zoom limit position.
In this case, the zoom may not reach the tele end.
・ When rapid zooming to the tele end is required to focus on the object precisely.
・ To confirm, in a moment, the composition of the image in the extreme closeup shot.
While pressing the quickzoom & auto cruising zoom switch, perform precise focusing or confirm the
composition of the image in the extreme closeup shot.
Release the quickzoom & auto cruising zoom switch.
－ The zoom will move to its former position quickly.
ZOOM MAXIMUM SPEED CONTROL KNOB
ZOOM & AUTO CRUISING ZOOM
SWITCH
- 10 -