FujiFilm FUJINON HA14x4.5 BEZD-T58B, Руководство по эксплуатации

Страница: 46 / 108

- 8 -
(2) QuickFrame Operation （Operation by Zoom Seesaw Control Lever）
a. Set the quickframe/manual zoom select knob to “ON.”
b.
In QuickFrame operation, the transition from the servo operation mode to manual operation mode can be
made without any changing operation. Therefore, after framing a shot manually, returning to the servo
operation can be performed quickly.
Operation
・ For servo operaion,
press T-side of the lever to zoom to the tele side, and the W-side to zoom to the wide side. For the
speed control, adjust the strength to press the lever. Pressing the lever deeply makes the zoom speed
faster, and shallowly makes slower.
・ In manual operation,
clockwise rotation of the zoom ring, viewed from the camera side, moves the zoom to the wide side, and
counterclockwise rotation to the tele side.
Note. If the zoom limit function is used, the zoom will stop at the zoom limit positions. In this case, the
zoom may not reach the tele end or the wide end.
For servo operaion, press the T side or the W side of the zoom seesaw control lever.
For manual operation, rotate the zoom ring directly or using the zoom lever.
(The mode changes automatically from servo to manual and vice versa, without any mode changing
operation.)
＜ Control of Zoom Torque ＞
By operating the zoom torque control knob (see the next page), the zoom ring operation torque can be
changed to meet the operator’ s requirement. Rotate the knob in the direction toward LOW to rotate the
zoom ring with lower torque, and rotate the knob toward HIGH to rotate the zoom ring with higher torque.
Note. If the power is not supplied to the lens from the camera, the zoom torque cannot be controlled.
＜ Control of Zoom Maximum Speed ＞
By means of the zoom maximum speed control knob (see the next page), the zoom maximum speed can be
changed in seven steps in servo operation. Rotate the knob clockwise to increase the speed.
Front View Rear View
ZOOM MAXIMUM SPEED CONTROL KNOB
ZOOM TORQUE CONTROL KNOB
QUICKZOOM & AUTO CRUISING ZOOM SWITCH