FujiFilm Frontier LP7500, Руководство по эксплуатации, Страница: 93 / 164

6.1 Display module
6 – 3
6.
H
o
w
to
us
e t
he d
is
p
la
y
mod
u
le
6.1.1 Each display
6.1.1.1 Status Display
button Allows you to scroll each item downward in the display.
button Allows you to return to the previous display.
button Allows you to move to the next display.
5 PAPER INFO. button Shows the Magazine Information display and the information of the currently
attached magazine.
• For details, see
☞
6.1.1.4 Magazine Information display.
You can access other displays by pressing this button again.
If no buttons are pressed for a minute on the
Magazine Information display, the
display will automatically return to the original display.
6 PROC. DRIVE button Pressing this button for a few seconds turns on or off the processor drive.
No. Explanation
1 The following messages are shown.
" PREPARING...
This message is shown on the conditions below.
• The processor temperature is being adjusted.
• The laser temperature is being adjusted.
• Initializing.
" STAND-BY
Printing can be performed.
" PROCESSING...
Printing is being performed.
" CONTROL STRIP
Automatic control strip processing is being performed.
" SETUP...
The setup is being performed.
"
MAINTENANCE...
The maintenance is being performed by the operation PC.
" PROGRAM TIMER..
The program timer is activated.
2 The laser temperature is being adjusted.
•
+ →
The temperature is being adjusted.
• $
→
The temperature adjustment is completed.
3 The processor Temperature Status
•
+ →
The temperature is being adjusted.
•
∗ →
The temperature adjustment is completed.
4 Allows you to operate with / button.
5 Temperature of the processing solution is shown.
The processing solution name varies depending on the specification.
No. Button Explanation
PREPARING...
2
1
3
4
5
G087950