FujiFilm Frontier LP7500, Руководство по эксплуатации, Страница: 31 / 164

2.1 Component names and functions
2 – 7
2.
G
e
tti
ng Starte
d
*1. It is a print size that has an advance length of 457.3 mm or more.
2.1.3.1 Types of processing racks and processing solutions
The following is the types of processing rack and processing solution.
Check the positions of the processing racks and types of processing solution in the figure below.
• Off
The paper processor section is not working.
• Blinks in red.
There is an error. Paper processing is not available.
9 Print sorter unit Receives small prints.
10 Manual sorter switch • On
The program timer is activated.
Press it while the program timer is being activated to start this system.
• Blinking
The system is being started up.
• Off
The system is activated.
Pressing the switch moves the tray of the print sorter unit.
It also measures the output amount of the replenisher pump.
11 Long length print tray Receives long length prints.
*1
12 Dryer top cover Open this door to take the dryer rack out.
13 Colorimeter unit Measures color and density of setup prints to keep the quality of prints.
14 Effluent valve door Open this to empty out the effluent.
15 Effluent valve Used to collect effluent.
16 Circuit breaker When this switch turns on, this system will be turned on.
When this switch turns off, this system will be turned off.
17 Replenisher cartridge
Replenishment solution of Color Developer and Bleach Fixer is in the
cartridge.
18 Replenisher section door
The door in the replenishment cartridge section.
19 PSR replenisher tank inlet
The inlet is for PSR replenisher tank.
Layout Processing rack number Type of processing
solution
1 Color Developer
2 Bleach Fixer
3 Stabilizer
4
5
6
No. Name Functions
1 2 3 4 5 6