FujiFilm Frontier LP7500, Руководство по эксплуатации

Страница: 35 / 164

3.1 Starting up the system
3 – 3
3.
T
u
rni
n
g pow
er
on
/off
4.
Prepare the requirements for Start Up Checks and perform it following the instruction on the
display.
Example: Start Up Checks display
• For details, see
☞
Maintenance Manual 2.1 Start Up Checks.
This completes the operation.
3.1.2 Starting up the system during the temperature adjustment of
processing solutions
When using this system during the temperature adjustment of the processing solutions, follow the procedure below.
1.
Check whether the operation PC has started up.
If not, start it up.
2.
Access the Start Up Checks display.
Bringing up the display
On the Maintenance display, click Start Up Checks .
• To access from the Controller display, see Operator's Manual of the Controller.
• If performing the Start Up Checks using the display module, see
☞
6.1 Display module.
3.
Wait until the temperature adjustment of the processing solution is completed.
When the temperature adjustment of the processing solution is completed, the ready lamp of the processor lights in
green.
N
OTE
• The function can be configured or confirmed depending on the item during the temperature adjustment of the
processing solutions.
4.
Prepare the requirements for Start Up Checks and perform it following the instruction on the
display.
Example: Start Up Checks display
• For details, see
☞
Maintenance Manual 2.1 Start Up Checks.
This completes the operation.
3.1.3 Starting up the system while the program timer is being activated
When the circuit breaker is turned on and the system is not started, the program timer is being activated.
S5304-00-UM00
S5304-00-UM00