FujiFilm Frontier LP7500, Руководство по эксплуатации

Страница: 81 / 164

5.3 Replacing paper
5 – 21
5.
Pri
n
ting
5.3 Replacing paper
Load the paper to be used for printing into the paper magazine.
I
MPORTANT
• Use paper with its emulsion side out and with a roll diameter of 250 mm or less (corresponding to a paper
length of about 186 m).
• After removing the paper from cold storage, wait at least five hours until its temperature matches the room
temperature before you load it.
• If you do not use up the paper within four days, remove the paper from the paper magazine and store it in a
cool and dark place when closing down the system.
• Be sure to change the emulsion number when the paper emulsion number is changed.
Emulsion number is the production number of paper emulsion. You can find it on the paper package.
Changing the emulsion number affects the color of the print finish.
• For details, see the Operator's Manual
☞
2.5 Registering and setting up paper of different emulsion number
[Emulsion Number Change].
• For details about how to view the Operator's Manual, see
☞
8.1 Accessing the HELP display.
5.3.1 Replacing paper
1.
Prepare the paper magazine for replacing paper.
(1)
Remove the paper dust in the paper outlet section with a vacuum cleaner.
This figure shows the side marked C of the paper magazine faced up.
(2)
Face the side marked B of the paper magazine upward and unlock the two latches.
Paper outlet section
G069551
Latches
G069534