7.2 Paper jam in the paper processor section
7 – 18
35.
Attach the processing racks and secure them with the rack stopper.
I
MPORTANT
• Dry the processing racks before attaching. If the processing racks with excessive moisture are
attached, the processing solutions are diluted and it may adversely affect print quality.
• Slowly remove and attach the processing racks. If they are removed and attached roughly, solutions
in the tanks may splash.
• If the processing racks are not fixed with the rack stoppers, paper jam or other troubles may occur.
The processing racks in the processing solution tank will float to the surface. Therefore, you need to push them
down into the solution and secure them with the rack stopper (far). As all the processing racks cannot be pushed at
the same time, attach them by two by following the steps below.
(1)
Attach processing racks Nos. 6 and 5 into the tank and secure them with the rack stopper (near).
(2)
Push processing racks Nos. 6 and 5 down into the solution and move the rack stopper (far) slightly to
the left to secure them.
At this time, the rack stopper is released for processing racks Nos. 1 to 4.
(3)
Attach processing racks Nos. 4 and 3 into the tank and secure them with the rack stopper (near).
(4)
Push processing racks Nos. 4 and 3 down into the solution and move the rack stopper (far) slightly to
the left to secure them.
At this time, the rack stopper is released for processing racks Nos. 1 and 2.
(5)
Attach processing racks Nos. 2 and 1 into the tank and secure them with the rack stopper (near).
(6)
Push processing racks Nos. 2 and 1 down into the solution and move the rack stopper (far) fully to the
left to secure them.
36.
Attach the upper guides and the squeegee unit.
I
MPORTANT
• Dry the upper guide (No. 1) before attaching. If the rollers are wet, it will adversely affect the finished
print.
37.
Close the squeegee unit top cover.
Secured
Released
Processing rack (No. 6)
Rack stopper (rear)
Processing rack (No. 5)
Rack stopper (near)
G069732
Содержание Frontier LP7500
