FujiFilm Frontier LP7500, Руководство по эксплуатации, Страница: 102 / 164

6.1 Display module
6 – 12
6.1.5.2 Changing the Emulsion Number
6.1.6 Confirming the status
6.1.6.1 Confirming the present time
Example:
Example:
If the measured result is OK
Press the
Enter button.
The result is registered.
The display returns to the previous one.
If performing the setup for several paper types, the same setup
procedure repeats.
If the measured result is FAIL
Press the
Enter button.
The measured result is not registered.
The display returns to the previous one.
Perform DAILY SETUP again.
Display Operations
Example: Press the Enter button.
If there are several types of paper that can be used
Press the / button to display the type of paper to set up, then press
the Enter button.
Press the Enter button.
A print is made, and the next display is shown automatically.
If the measured result is OK
Press the
Enter button.
The result is registered.
The display returns to the previous one.
If the measured result is FAIL
Press the
Enter button.
The measured result is not registered.
Perform EMULSION No. using a print that is made again.
Remeasurement can be performed up to three times.
Display Operations
Press the Menu button for a few seconds.
Display Operations
MEASUREMENT (77) OK
<DAILY SETUP>
MEASUREMENT (77) FAIL
<DAILY SETUP>
<EMULSION No.>
START PRINTING
<EMULSION No.>
PRINTING...
<EMULSION No.>
MEASURING...
<EMULSION No.>
MEASUREMENT OK
<EMULSION No.>
MEASUREMENT FAIL
<EMULSION No.>