FujiFilm Drypix 5000, Руководство по эксплуатации

Страница: 66 / 142

4-26
006-240-20 2004.03
Utility Operation
5 The display then changes to a screen like that shown below, where you can set up a
time period for Economy Mode and None Economy by the day of the week.
[Fig. 4.42] Scheduler Screen
If the operation panel is not touched or no data comes from the outside exceeding the time
period specified so that the Transition Time is effective, the Economy Mode function will be
performed.
(1) Press the ECONOMY MODE or NON ECONOMY button to select a mode you
want to set.
(2) Use the buttons to select a position for starting time of ECONOMY
MODE or NON ECONOMY and press the button. The cell then turns red
for ECONOMY MODE and white for NON ECONOMY .
(3) Use the buttons to select a position for finish time of ECONOMY
MODE or NON ECONOMY and press the button.
You are then returned to [ Fig. 4.42 ].
[Fig. 4.43]
(4) Repeat steps (1) through (3) for each day of the week to perform necessary settings.
(5) Check to see that settings have been performed correctly and press the
button to determine the setup data.
(6) Press then the button to return to the [ Fig. 4.41 ] Details screen.
Note that the setup data is determined only when you press after
has been pressed accordingly.
(7) To perform settings for “ Calendar ” consecutively, press the button on
[ Fig. 4.41] and proceed to “ 4.8.3 Calendar ”. If you do not wish to perform settings
for “Scheduler” and “Time of Office Closed”, press the button on
[ Fig. 4.41 ] and then the same button on [ Fig. 4.40 ]. You can then exit Economy
Mode to return to the Utility Initial screen.