FujiClean CE Series, Руководство пользователя

Страница: 17 / 47

Open all access covers and secure the area around the
access openings.
5. Treated Effluent Check. (Recommended frequency:
1x every 6 months)
Collect a sample of treated effluent from the
aeration chamber and evaluate for clarity and odor
and pH. Sample should be nearly clear and with a
faint musty smell. If sample is cloudy or exhibits a
septic odor, then the system is not treating properly
and requires maintenance. Please refer to the
Troubleshooting Guide for direction. pH should be
checked. If too low, procedures should be
implemented to correct. (see Troubleshooting
Guide).
6. High Water Float Switch Check. (Recommended
frequency: Start-up and 1x every 6 months)
Check that the high water float switch is operating
freely. Lift up the high water float switch to check
that the alar is triggered. Note: Float’s a ti atio
horizo is . a o e or elo le el horizo .
7. Inflow Pipe Check. (Recommended frequency: Start-
up and 1x every 6 months)
Make sure that the inflow pipe is not blocked.
8. Transfer Scum. (Recommended frequency: 1x
every 6 months)
If any scum appears in the Chamber 3, scoop with a
ladle or a collection jar and transfer it into the
sedimentation chamber.
Take samples from either
“torage Cha er or
Disi fe tio Cha er u less
chlorine is used).
Use ladle or
sample jar to
transfer scum
back to
Chamber 1.
15