FujiClean CE Series, Руководство пользователя

Страница: 16 / 47

Blower Air Filter Cleaning / Replacement Procedure
Blower Diaphragm Replacement Procedure
Replacing the blower air filter is
very simple and consists of
removing the filter cover with a
Phillips screwdriver, removing the
old, cleaning it (blow clean with
air pressure) or replacing it with a
new filter, and then screwing the
cover back into place.
Step 1. Remove cover bolts and
screw with 8mm socket and
screwdriver
Step 2. Remove autopiece stop
as shown:
Step 4. Remove 4 screws
from one casing.
Step 5.
Remove nylon nut and
diaphragm from body
Step 3. Remove power
cable from 4 hooks. Do
not remove screws.
Do not
remove
screws.
Step 6. Install new diaphragm using
new nylon nut provided. Torque
tighten to about 1 Nm.
Normal position. Turn auto-stop
piece and face
▲
symbol along slot.
Remove auto-stop
piece from blower
auto-stop holder.
Removing auto-piece stop
Replacing auto-piece stop (see Step 9)
Face
▲
symbol s and slide
auto-stop into holder.
Push auto-stop
until it clicks
Ready for use
Step 8.
Fit power cable
onto 4 hooks.
Step 9.
Re-set auto-piece
stop as shown above
Step 10. Replace cover bolts and
screw.
Step 7. Insert casing air outlet into
rubber grommet. Secure with 4 screws.
Repeat Steps 4-7 for 2
nd
diaphragm.
Ensure
grommet
is upright
14