Fuji Xerox DocuPrint C525 A, Руководство пользователя

Страница: 57 / 96

5.5 Message List
57
010-397
Reboot printer The two orange, outside levers on both sides of the fuser unit are not locked
securely. Lock the levers securely. If this does not solve the problem, contact our
Customer Support Center or your dealers.
016-316
Reboot printer The additional memory (optional) is not installed correctly. Switch off the printer,
reinstall the memory and then switch the printer on.
016-318
Reboot printer The printer detected an unsupported additional memory in the memory slot. Install
the supported additional memory.
Refer to
• “Optional Accessories” (P. 85)
Bypass
Check Paper Inappropriate paper is loaded in the bypass tray. Load the correct size of paper.
Close Cover x The cover x is open. Close the cover x.
Refer to
• “1.1 Main Components and Their Functions” (P. 12)
Close
Duplex Module The unit D is open. Close the unit D.
Refer to
• “1.1 Main Components and Their Functions” (P. 12)
Close front door The front door is open. Close the front door.
Refer to
• “1.1 Main Components and Their Functions” (P. 12)
Invalid Job
Press Set Printing cannot be done according to the current printer settings. Press the <Eject/
Set> button to cancel the print job. Then check the printer settings in the printer
driver and print again.
Load Bypass
xxxx There is no “xxxx” paper left in the bypass tray. Load “xxxx” paper.
Refer to
• “Loading Paper in the Bypass Tray” (P. 32)
Load Bypass
xxxx XXXX There is no “xxxx” size paper that is “XXXX” type paper left in the bypass tray. Load
“xxxx” size paper that is “XXXX” type into the bypass tray.
Refer to
• “Loading Paper in the Bypass Tray” (P. 32)
Load correct
paper in Bypass Unsupported transparencies may have been loaded. Load the appropriate
transparencies.
Refer to
• “3.1 About Paper” (P. 28)
Load Tray N
xxxx
(N: 1 or 2) There is no “xxxx” paper left in tray N. Load “xxxx” paper.
Refer to
• “Loading Paper in the Paper Trays (Optional)” (P. 33)
Load Tray N
xxxx XXXX
(N: 1 or 2) There is no “xxxx” size paper that is “XXXX” type paper left in tray N. Load “xxxx” size
paper that is “XXXX” type into tray N.
Refer to
• “Loading Paper in the Paper Trays (Optional)” (P. 33)
Open Cover x
Clear jam The printer detects a paper jam inside the printer. Open the indicated cover and
remove the jammed paper.
Refer to
• “5.1 When Paper Jams” (P. 46)
Message Condition/Reason/Action