Fuji Xerox DocuPrint C525 A, Руководство пользователя

Страница: 47 / 96

5.1 When Paper Jams
47
Inside the Duplex Unit
Open the Cover C
1. Pull the cover C forward by grasping the
indentation on the backside of the printer,
and then remove any jammed paper.
2. Close the cover C.
Open the Unit D
1. Push up the lever shown in the diagram
and then open the unit D. Remove the
jammed paper.
Note
• Paper can also jam near the center output tray. In this
case, refer to “Near the Center Output Tray” (P. 47).
2. Close the unit D.
Near the Center Output Tray
1. Open the cover A (or the unit D when the
duplex unit is installed), and then lift up the
levers on both sides (green colored part).
Important
• The fuser unit, and the surrounding area are hot. You
may get burnt if you touch it directly.
• Never touch the outer levers located on both sides of
the fuser unit (orange colored part), which are used to
remove or install the fuser unit.
2. Open the fuser cover by grabbing the knob
on the left side and remove any jammed
paper.
3. Push down the levers on the both sides. Close the cover A (or the unit D when the
duplex unit is installed).