Fuji Xerox DocuPrint C1110 B Скачать руководство пользователя страница 176

Страница: 176 / 209

176

7 Maintenance

Close the front cover.

Important

• When closing the cover, be careful not to get your fingers caught between the cover and the printer.

Remove the tray 1 out of the printer, and remove the paper in the tray. Re-wrap the
paper and store it away from dust and humidity.

10. If the tray is extended, push the extended portion back into the tray by holding the

right rear side of the tray.

11. Push the tray all the way into the printer.

Important

• When inserting the tray, be careful not to get your fingers caught between the tray and the printer.

12. Lift the printer and move it gently. If moving it over a long distance, pack it in a box.

Important

• When lifting the printer, make sure to follow the precautions stated in “Important” (P. 175).

Содержание DocuPrint C1110 B

















































































































































































































Результаты поиска

Содержание DocuPrint C1110 B

Отзывы:

Fuji Xerox DocuPrint C1110 B, Руководство пользователя, Страница: 176 / 209

Результаты поиска

Содержание DocuPrint C1110 B

Отзывы: