Fuji Xerox DocuCentre 1055, Руководство пользователя

Страница: 144 / 245

9 Setups
144
• Print Mode – Specify the method used to process print data (applied print language).
When [Auto] is selected, the machine automatically detects the print language of the
data received and interprets and prints the data correctly. When [PCL] or [PS] is
selected, the data received from computers is processed as each of these
respective data types.
• PJL – PJL commands are required when printing using the print driver. Specify
whether to [Enable] or [Disable] PJL commands that are sent from the computer.
• No. of searches – Specify how many times the file server is searched. Specify a
value between 1 and 100 in increments of 1, or set it to [No Limit]. To specify a value,
select [Number of times], and then enter the value.
• TBCP Filter – Specify whether to [Enable] or [Disable] the TBCP filter when the
PostScript data is processed.
SMB
Use to set up SMB.
• Port Status – Specify whether to [Enable] or [Disable] the port status of SMB.
• Transport Protocol – Specify the transport protocol to be used for SMB. Select [TCP/
IP], [NetBEUI], or both.
• Print Mode – Specify the method used to process print data (applied print language).
When [Auto] is selected, the machine automatically detects the print language of the
data received and interprets and prints the data correctly. When [PCL] or [PS] is
selected, the data received from computers is processed as each of these
respective data types.
• PJL – PJL commands are required when printing using the print driver. Specify
whether to [Enable] or [Disable] PJL commands that are sent from the computer.
• TBCP Filter – Specify whether to [Enable] or [Disable] the TBCP filter when the
PostScript data is processed.
IPP
Use to set up IPP.
• Port Status – Specify whether to [Enable] or [Disable] the port status of IPP.
• Print Mode – Specify the method used to process print data (applied print language).
When [Auto] is selected, the machine automatically detects the print language of the
data received and interprets and prints the data correctly. When [PCL] or [PS] is
selected, the data received from computers is processed as each of these
respective data types.
• PJL – PJL commands are required when printing using the print driver. Specify
whether to [Enable] or [Disable] PJL commands that are sent from the computer.
• Access Control – Specify whether to enable or disable the access control when
stopping or deleting the print job.
• DNS – Specify whether or not to use the name registered in DNS when recognizing
the machine.