FTE Maximal MAX S123 HD, Быстрое руководство по установке, Страница: 34 / 44

PAG. 34
rev 1.1
EN
GL
ISH
TOOLS
2. After you input the correct password a warning message will
be displayed like the one beside (OSD 73).
3. If you select “Yes” then all changes you made will be reset to
default values. Make sure you really want to do this!
4. Press [Exit] in both steps will close the window without
resetting the receiver.
6.4. SOFTWARE UPGRADE
It is possible to make the updating of the receiver by the means
of satellite (OTA), by the means of USB port or by network
and it is also possible to make a backup of the information of
the receiver in the USB device, connected as you can see in
OSD 74.
6.4.1. UPGRADE BY USB
This option allows updating the software of the receiver with the
received data from a USB memory device. To do it, connect a
USB memory device to the receiver and accede to this menu
option (OSD 75).
The last software version to be loaded must be placed at the
root path of your USB device.
1. Upgrade mode: Select with [
], the mode of
upgrading.
2. Update file: Select with [
], the name of the file to be
loaded.
3. Select “Start” and press [OK]. An alert message appears
indicating not to take out the memory device during the loading
process.
4. Once the file has been loaded, it requires the conformity
to end the upgrading process, writing into the receiver the
upgrading. Press [OK] to upgrade the receiver (OSD 76). In
case during the reading of the file, it is corrupted or it would be
a not appropriated for this model of receiver, an alert message
would appear “Error reading the USB disk”.
5. After pressing [OK] the receiver will write into the Flash
memory, and it will reboot to end the upgrading process.
For further information about the upgrading of the receivers,
please visit http://www.universbyfte.com, in the chapter about
upgrading receivers.
6.4.2. BACKUP TO USB
This option allows saving information of the receiver in the USB
device or loading settings previously saved (OSD 77).
1. Channel list: Select with [
] between “load from USB”
or “Write to USB”.
2. Upgrade file: Select with [
], the name of the file to
be loaded.
3. select “start” and press [OK] in order to save the data.
OSD 73
OSD 74
OSD 75
OSD 76
OSD 77