FTE Maximal MAX S123 HD, Быстрое руководство по установке, Страница: 24 / 44

PAG. 24
rev 1.1
EN
GL
ISH
cannot modify 22K.
- Polarity: Press [
] to switch between “Auto / H / V”.
(Motorized Antenna
*
) (OSD 37):
- LNB Freq: Use [ ] n order to change among “Universal”
or a specific frequency of the local oscillator.
- Motor Type: Press [
] to select between DiSEqC1.2
and GOTO-X”.
- Local Longitude: Geographic length of your position.
- Local Latitude: Geographic latitude of your position.
- Delete all: Deletes all the satellite positions saved.
- Motor Setting: It allows configuring all the engine positions.
- Limit Setup: It allows configuring the East and West position
of the engine.
* This receiver does not allow moving DiseqC motors
(Unicable (SAT-CR)) (OSD 38):
If you have an Unicable installation that allows you to distribute
a satellite signal through a unique cable up to 8 receivers as
maximum, in this menu option you can configure the receiver.
- Satellite: Press [
] to switch Satellites. (FIXED)
- LNB Type: Press [ ] to switch among “Unicable(9750-
10600” and “Unicable(10200)“
- IF Channel: Channel of the receiver if it belongs to an Unicable
installation. Select with [
] keys the numbers from 1 to
8.
- Central Frequency: With [
] keys choose the frequency
of a channel in an Unicable system.
- Sat Position: Press [
] to switch among “A” and “B“.
Each receiver of the Unicable system must have a channel and
frequency different from the rest.
- Press [Exit] to save the changes.
4.3. SATELLITE LIST
When you enter the “Satellite List” menu you can see a window
like the one beside (OSD 39):
1. Move through the satellite list using [
].
2. Press [Red] button to enter edit satellite menu (OSD 40).
You can edit the satellite’s name and its longitude. Once you
have edited the satellite, confirm with [Yellow]. If you prefer to
exit without saving the changes press [Blue].
3. Press [Green] button to open the “Add satellite” window.
You can edit the satellite’s name and its longitude. Once you
have edited the satellite, select “Save” option and confirm with
[Yellow]. If you prefer to exit without saving the changes press
[Blue].
4. After pressing [Blue] button you will be asked “Are you
sure to delete?” (OSD 41). Select “Yes” to delete the marked
satellite. Select “No” to cancel the operation.
INSTALLATION
OSD 37
OSD 39
OSD 38
OSD 40
OSD 41