FTE Maximal MAX S123 HD, Быстрое руководство по установке, Страница: 31 / 44

PAG.31
rev 1.1
EN
GL
ISH
OSD 63
OSD 64
SYSTEM SETUP
in a frame in the top right margin (OSD 62).
6. Press [Exit] to exit the menu.
5.3.3. SLEEP TIMER
Press [OK] button in this option to set the sleep timer. Pressing
[OK] button again you can choose between “OFF,10, 20, 30,
40, 50, 60, 70, 80, 90, 100, 110 120. (OSD 63)
If you set a sleep time, the system will change to Standby mode
after the chosen time period.
5.4. OSD SETTING
When you select “OSD Setting” you will see a screen like
beside (OSD 64):
1. OSD Timeout: This setting determines the duration the info
window is displayed on the screen when you change channels.
Press [
] to set the time between 1 to 10 seconds.
2. Position: To define the position of the information’s bar (top/
bottom).
3. OSD Transparency: With this parameter you can set the
transparency of the menus. Press [
] select the value
between 10%, 20%, 30%, and 40% and “NO” (means no
transparency function).
4
. Display Setting: When you enter this option, you will see a
screen like (OSD 65). It allows configuring these parameters:
Brightness, Contrast, Saturation, Hue and Sharpness.
Press [
] to select the parameters and use [ ] to
change the values.
5. Load OSD Setting Default: If you want to reset your OSD
settings to the default settings then select this item and press
[OK].
6. Press [Exit] button to leave the “OSD Setting” menu.
5.5. PARENTAL LOCK
You can set a password for anyone who wishes to operate
the “Installation” menu. You can also set the password to
lock channels. Below you find how to set and change the
password.
1. On “Parental Lock”, press [OK] to open a dialogue box and
input the password. After you entered the correct password,
you will see a screen like beside (OSD 66):
2. Menu Lock: If Menu Lock is set to “Yes” then you need to
enter the password every time you want to open then menu. If
it is set to “No” then you can open the menu without entering
the password first.
3. Channel Lock: If set to “Yes” then you need to enter the
password before you can see those channels which have been
marked as locked channels in the Channel menu. If it is set to
OSD 66
OSD 65