FTE Maximal MAX S123 HD Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 44

FTE Maximal MAX S123 HD Скачать руководство пользователя страница 3

PAG.3

rev 1.1

EN
GL
ISH

Example 1 –

Basic System

Example 2 –

DISEqC switches

QUICK INSTALLATION GUIDE

Follow next steps for the correct installation of this receiver.

STEP 1: OUTPUT VIDEO CONFIGURATION

In order to correctly visualise the reception signal on TV, you must configure the format and mode of
the video output.

- Video output mode: In order to get a correct visualization of the image we recommend:
1. In case you make the connection to your Tv by the means of “Tv scart” output, select “SD” video
output
2. In case you make the connection to your Tv by the means of “HDMI” output, select “HD” video
output.

- Output format. You will be able to select among the following formats:
1.In case SD video output is selected, you will be able to select AUTO, PAL or NTSC format.
2.In case HD video output is selected, you will be able to select among the following formats: AUTO,
TV,

480I, 480P, 576I, 576P, 720P_50, 720P_60, 1080I_25, 1080I_30, 1080P_50, 1080P_60,

1080P_25, 1080P_30 or 1080P_24.

STEP 2: CONNECTIONS

The coaxial cable, with satellite signal, must be connected to the “IF IN” connector. The “HDMI” or
SCART connector must be connected to the TV set.
Screw the WiFi antenna on the USB adapter. Make sure it is well screwed as far as it will go, to not
lose sensitivity.
Connect the WiFi Dongle in the “USB” port in order be able to open the internet menu.
Turn the WiFi antenna orientating it vertically upwards.
Depending on the type of installation, the receiver should be connected and configured following next
examples.

QUICK INSTALLATION GUIDE

In order to download the complete user’s guide and get more information about receivers,
please visit the website http://www.ftemaximal.com

«
1
2
3
4
5
...
»

Содержание MAX S123 HD













































Отзывы:

Нет отзывов