FTE Maximal MAX S123 HD, Быстрое руководство по установке, Страница: 26 / 44

PAG. 26
rev 1.1
EN
GL
ISH
INSTALLATION
4.5. SINGLE SATELLITE SEARCH
After selecting Antenna Setup another window will be opened
(OSD 47).
You can edit the following items:
1. Satellite: Press [
] to switch Satellites or press [OK] to
enter satellite list to select directly.
2. DiSEqC1.0: Use [
] to switch the options of DiSEqC
switches.
3. On “TP Index” item use [
] to select the desired
transponder.
4. In the “FTA Only” item, press [
] to select to scan only
free channels or even scrambled channels. If you select “Yes” it
will scan free channels only.
5. In “Scan Channel” item, press [
] to select to scan TV
+ Radio Channels, or just TV channels or just Radio channels.
6. In “Scan Mode” item you can select “Auto Scan” to blind scan
, “Preset Scan” to scan all preset transponders or “NIT Search”
(the NIT (Network Identification) will be identified and the
receiver will automatically search all the TP of this network).
7. Move the highlight to “Search” and press [OK] button to
start scanning. Bars are showing the progress of the channel
scanning in the lower part of the window and the found channels
are listed (OSD 48).
You can stop the scan with [Exit] and save the so far found
channels.
8. Press [Exit] to exit this menu. A window to confirm the
changes will appear.
4.6. MULTI SEARCH
When you enter the “Multi Search” menu a window like the one
beside will open (OSD 49).
1. On “FTA Only” item, press [
] to select scanning of all
channels or just scanning of free channels. If you select “Yes”
it will scan free channels only.
2. On “Scan Channel” item, press [
] to select the
scanning range from TV + Radio Channels, only TV channels
or only Radio channels.
3. On “Scan Mode” item, you can select “Auto Scan” to make
a blind scan , “Preset Scan” to scan all preset transponders or
“NIT Search” (the NIT (Network Identification) will be identified
and the receiver will automatically search all the TP of this
network).
4. Select “Search” and press [OK] to start scanning. In the
lower part of the window the progress of scanning and the
found channels are displayed.
5. Press [Exit] to cancel or finish the scanning and saving the
found channels.
OSD 47
OSD 48
OSD 49