FSL3D Phoenix Touch, Руководство пользователя

Страница: 12 / 45

12
● Loosen the flat head screws on the Phoenix, and lower the assembly over the screw.
Keep the taller notched end of the supervat towards the back of the machine. This
allows clearance for the build head to move.
● Shift the SuperVAT™ back so that the screw rests in the thinner section of the hole.
● Tighten SuperVAT™ in place.
Build Head Leveling
1. To attach the build head, loosen the large thumb screw at the top of the arm assembly.
This loosens the bracket for attaching your build head.
2. Loosen the hex bolt using a 4mm hex driver on the left side of the arm (when looking at
the front of the machine). This loosens your ball joint for leveling.
3. Slide the build head into place. and tighten the thumb screw. ​ Do not ​ tighten the hex
screw.
4. Power on your Phoenix. Using the touch screen menu, press the gear icon in the upper
right hand corner. On the next screen, select the “Calibrate Motor” button. In the motor
control menu, bring the build head down to the inside of the vat using the “Motor Down”
button.
[Main Menu]