FSL3D Phoenix Touch, Руководство пользователя

Страница: 11 / 45

11
Placement of SuperVAT™
The SuperVAT™ consists of the metal frame, acrylic bottom, SuperVAT™ liner, and two
retention thumb screws. Be sure that all your components are clean and that any packaging
and protective films have been removed.
​
Do not
​
remove yellow Kapton tape from the
SuperVAT™.
● Peel away the protective film on the acrylic bottom.
● Remove the two retaining screws from the metal frame. These thumb screws will
require no tools.
● Set the SuperVAT™ liner into the metal frame. Be sure that the bottom lies flush to the
acrylic bottom.
● Replace the two thumb screws. The face of the screws should be on the inside of the
vat.
To attach the assembled SuperVAT™ to the machine:
[Main Menu]