FScurtis ECO Scroll Series, Инструкция по эксплуатации

Страница: 31 / 40

ES08 ‐ 15 Controller v1.01.05
2022 ‐ 02 ‐ 03 FS ‐ Curtis Page 29
To change the date or time:
a) Select the year, month, day, hours, minutes or seconds field by pressing it on the touch screen. The
selected field value digits will change from white to yellow colour and the increase and decrease
arrows will appear above and below the field, respectively.
b) Press the increase ( ) or decrease ( ) arrows to change the value.
c) Repeat steps (a) and (b) above until all the necessary changes have been made.
d) Exit the time settings menu screen by pressing the close ( ) button at the top right-hand side of the
screen.
2.13 Communication Settings Menu
The RS-485 communication settings menu is accessed via the system menu. Logging-in with the service
password is necessary to view the parameters or edit the set values. The communication settings menu
screen is shown in Figure 2.14.
Figure 2.14 – Communication Settings Menu Screen
Each of the RS-485 communication settings menu parameters is described in Table 2.11. These are relevant
to sequential operation of multiple compressor sets in an interconnected group and also to integration of one
or more compressor sets in an automated monitoring and control system using the Modbus protocol.
Table 2.11 – Communication Settings Menu Parameters
Parameter Set Value Function
Password
To View
Password
To Edit
Transmission
Mode
RTU
Modbus serial data
transfer protocol.
Service Service