FSC A320 SIDESTICK PRO OEM, Инструкция для инструктора

Страница: 170 / 329

A320 Neo Instructor Operating Station
Instructor User Guide
REFERENCE AIRPORT Tab
13 Oct 2017
Page 136
9.8.4
Snow
Tap this button to set a pre-defined amount of snow to the visual scene.
From the activated state, tap this button again to deselect this setting.
This button is disabled when the temperature is above 5 degrees Celsius.
9.8.5
Hail
Tap this button to set the amount of hail to 33% (light hail setting). In this setting, if
no clouds were previously defined, clouds will automatically be inserted in the visual
scene.
From the activated state, tap this button to remove hail from the simulation.
This button is disabled when the temperature is below -5 degrees Celsius.
9.8.6
EFFECT Tab
The EFFECT Tab provides additional precipitation settings.
9.8.6.1 Winter Scene
Tap this button to display a winter scene on the visual scene.
From the activated state, tap this button to remove the winter scene from the visual
scene.
This button is disabled when the temperature is above 20 degrees Celsius or when a
significant latitude/longitude change has occurred, until the visual is ready.
9.8.6.2 Blowing Snow
Tap this button to enable the blowing snow effect of on the visual scene.
When blowing snow is enabled, blowing snow will occur only when a winter scene is
active and the wind is a non-zero value. When the blowing snow effect is active, the
visibility is reduced. This button is disabled when a winter scene is not active.
From the activated state, tap this button to remove the blowing snow effect from the
visual scene.