FSC A320 SIDESTICK PRO OEM, Инструкция для инструктора

Страница: 266 / 329

A320 Neo Instructor Operating Station
Instructor User Guide
Map Workspace
13 Oct 2017
Page 232
15.4.2.3.1 Adding a Storm
Adding a storm can be done in either one of two ways, through the:
•
Cursor Radial menu
Or,
•
Storm button on the map middle footer
To add a storm from the Cursor Radial menu:
1) Tap on the desired location on the map.
2) From the Cursor Radial menu, tap on the Add Storm icon (see Figure 120).
This displays the STORM PROPERTIES sliding panel.
3) From the TYPE section, tap to select the desired storm. This places the selected
storm at the cursor location on the map.
4) Edit the storm properties.
5) Tap on the Activate button to activate the storm at the cursor location.
6) A red ACTIVE flag next to the selected storm indicates that the storm is active
in the simulation.
7) A red badge overlaid onto the map middle footer Storm button indicates the
activated storms.
To add a storm from the Storm button:
1) Tap the Storm button on the map middle footer. This displays the STORM
PROPERTIES sliding panel.
2) From the TYPE section, tap to select the desired storm. This places the selected
storm approximately 20 nautical miles in front of the aircraft.
3) Edit the storm properties.
4) Tap on the Activate button to activate the storm.
5) A red ACTIVE flag next to the selected storm indicates that the storm is active
in the simulation.
6) A red badge overlaid onto the map middle footer Storm button indicates the
activated storms.